Generator
Conversions

Site Map

Dual Fuel Installation

IMPCO SERIES

Impco Model E Regulator

Impco Model PE Vaporizer

Impco Model L Converter

Impco Model J Vaporizer

Cobra
Two-Stage Converter

IMPCO
VFF30 Filter

FL-219 solenoid shutoff valve

FL-416-12V shutoff valve

FL-418 12V Fuel Lock

Generator Natural Gas Conversion Kits

For the Natural Gas Conversion we used the Garretson KN 039-122 fuel controller
with manual primer for ease of starting. The KN fuel controller works great
with 11 inches of water column or 6 ounces of pressure as well as the typical
natural gas line pressure of 5 ounces. And the manual primer located in the
back cover of the Garretson KN 039-122 makes it much easier to start the engine
as it primes the carburetor with natural gas. The SD 073-321 with manual primer
can also be used for the generator natural gas conversion.

Remove the air cleaner assembly

Install the adapter

Put the air cleaner assembly back in place

Mount the natural gas fuel controller on the frame

Note the load block for adjusting air fuel mixture

This engine has the safety lock off installed at the inlet of the fuel controller

Connect a supply line to your source of natural gas

This Generator can now operate on gasoline or natural gas

| Dual Fuel Installation | Safety Shut Off Installation |

1-877-4-ALT-FUELS or 1-877-425-8383