CALL US TOLL FREE 1-877-425-8383
For order information, prices, availability or general questions
Generator & Small Engine
Tri-Fuel Conversion Kits
Our Propane and Natural Gas Conversion
Kits are available for generators, welders,
concrete saws and more and are
EASY TO INSTALL!
Tri Fuel Natural Gas & Propane Conversion Kits
Tri Fuel Conversion Kits for Generators
Welders, Concrete Saws, Floor Cleaners, Man Lifts
Photo below shows the parts included in a Tri Fuel Conversion capable of High Pressure Propane, Low Pressure Propane, Natural Gas and the gasoline carburetor will not be modified, no drilling of the carburetor required. Kit includes a fitting to fit a 20 lb cylinder, the high pressure regulator, 3' supply line, Garretson KN Fuel Controller, mounting bracket, the hoses and fittings to go from the KN to the adapter, longer studs or stud extenders, and the load block for adjusting the air fuel mixture
Photo below shows parts included with the High Pressure Propane conversion for connecting directly to a propane tank that does not have regulators. Kit includes a fitting to fit a 20 lb cylinder, 3' high pressure supply line, the Beam T60 2 stage high pressure regulator fuel controller, mounting bracket, the hose and fittings to go to the adapter and longer studs or stud extenders, and a load block for adjusting the air fuel mixture
Photo below shows the parts included with the Low Pressure conversion kit for low pressure Propane, Natural Gas and the gasoline carburetor will not be modified, no drilling of the carburetor. Kit includes the Garretson KN demand regulator, mounting bracket, the fittings and hose from the KN to the adapter, longer studs or stud extenders, and a load block for adjusting the air fuel mixture
Adapters will change per engine make and model requirement
if your engine has 6mm studs you'll get stud extenders instead of longer studs
Propane makes it's own pressure naturally inside a tank no matter what size the tank is, a 20 pound grill tank and a thousand gallon storage tank both have equal pressure inside and as you draw the vapor from the top of the tank, the propane will boil inside the tank at 45 degrees below zero to bring that pressure back and replace the vapor that was drawn out of the tank. So if you are connecting directly to a propane tank without any regulators installed, the high pressure or multipal pressure kit will be required. If you are connecting to a tank that has a regulator installed to bring the pressure down to 11" water column or 6 ounces of pressure, this will need the low pressure kit. Natural Gas is low pressure, 4 ounces
Generator Make & Engine Models Listed Below
Briggs & Stratton
In order to be able to further assist you, we will need some additional details. Please provide us with the following information:
A.) Make of engine
B.) The engine model number
C.) The engine horsepower
D.) Style of the air cleaner, i.e. round or square
E.) Source Of Propane: Tank pressure, two stage (10-15 psi) or low pressure 6 oz 11 inches water column or 4 oz for natural gas
F.) Application of the engine, i.e. generator
G.) Electric start or pull start
H.) Does the air filter mount directly on the carburetor
For prices and availability please contact us with the above information
Small Engine Conversion Kits
Propane Conversion Kits
Natural Gas Conversion Kits
For Orders - Prices - Availability - or General Questions
Call Us Toll Free 1-877-4-ALT-FUELS or 1-877-425-8383
Email: info@propanecarbs.com
Please include your phone number