Natural gas conversions & propane conversion kits for generators.
Call Us Toll Free1-877-425-8383
For Orders, prices, availability or general questions & information

Generator & Small Engine
Tri-Fuel Conversion Kits

Our Propane and Natural Gas Conversion Kits are available for generators, welders, concrete saws and more and are

How To Adjust The Air Fuel Mixture Load Block Video


Video 2 Title: Adjusting Small Engine Fuel Adjustment Load Block After Installing a Conversion Kit

Please Note: If you leave the gasoline line disconnected as in the video below, you should plug it off,
otherwise it could be a vacuum leak signal which will cause the engine to run rough.
Once the engine has been started, you will need to adjust the load block, it has an adjustment screw with a lock nut, you will want to start about 5 to 7 turns out, and adjust for a smooth run at full 3600 RPM with a load on the generator or small engine. Also note, once the air fuel mixture is set, when you switch from propane to natural gas, you will need to re-adjust the load block out approximately 1/2 to 1 turn, when changing from NG back to propane, adjust load block back in 1/2 to 1 turn, each engine is different.


The Benefits of Converting Small Engines To Propane Video ➤➤

How To Install A Tri Fuel Conversion Kit ➤➤


For Orders - Prices - Availability - or General Questions

Call Us Toll Free 1-877-425-8383 or 1-877-4-ALT-FUELS

Please include your phone number Logo