Natural gas conversions & propane conversion kits for generators.
Call Us Toll Free1-877-425-8383
For Orders, prices, availability or general questions & information

Generator & Small Engine
Tri-Fuel Conversion Kits

Our Propane and Natural Gas Conversion Kits are available for generators, welders, concrete saws and more and are
EASY TO INSTALL!

Honda EU2000i Generator Conversion

 

Honda EU2000i Tri Fuel Propane and Natural Gas Conversion Kit

Currently Not Available
EPA Testing & Certification Pending

The First Version of This Special Kit & Special Adapter Design was Developed in 2009,
by Propane Carbs & our Impco Distributor

The New Version Will Have an Orifice Fuel Jet for Propane & an Orifice Fuel Jet for Natural Gas,
No Air Fuel Mixture Adjustments Necessary, Making This New Conversion Kit an Easy Setup

It's an EASY INSTALL and does not require any drilling of the carburetor

High Pressure Propane, Low Pressure Propane, Natural Gas

The Beam T52 in our kit includes an idle circuit feature for a Better Idle when the generator is in ECO Mode

Plus the T52 is smaller in diameter to keep the generator more compact

Honda EU2000 Tri Fuel Conversion

 

Remove the air filter assembly from the carburetor
Shut off for your gas line is included with the kit

Image of the carburetor before the adapter is installed

 

Install the adapter, in the photo below you can see our specially designed adapter
which is thin enough to allow the door to be closed

Honda EU2000 Adapter

 

 

Reinstall the air filter assembly

Replace the air filter on the eu2000

 

Install the bracket to mount the demand regulator,
With this bracket you will not have to drill holes in the case for mounting

Mount the bracket for the demand regulator

 

The photo below shows how far the demand regulator is mounted from the engine case
allowing the door to be opened
The New Kit Version Will Have an Orifice Fuel Jet Instead of a Load Block
There Will Be No Air Fuel Mixture Adjustments Necessary

Beam T52 Demand Regulator for propane and natural gas

 

Completely installed you're ready to use high pressure propane, low pressure propane,
natural gas, and easy to Setup

EU2000 tri fuel conversion

This EU2000i Conversion Kit has become very popular
It does it all, high pressure propane, low pressure propane, natural gas
All regulators, fuel controllers, fittings, hoses, and mounting brackets included

Please Note, this kit includes a more expensive demand regulator, the Beam T52 which includes an idle circuit feature for a Perfect Idle when the generator is in ECO Mode, and it's smaller in diameter to keep the generator more compact

The New Kit Version will include, a fuel jet for propane and a fuel jet for natural gas so there will be no adjustments that you will need to make for the air fuel mixture, a catalytic converter, the fitting for a propane tank, a high pressure regulator to reduce the pressure in a tank such as the commonly used 20 pound cylinder or any other size tank, a 6 foot supply line, the Beam T52 low pressure demand regulator for low pressure propane or natural gas, the bracket for mounting the T52 so you do not have to drill holes in the case for mounting, the thin adapter so you do not have to drill holes in the carburetor and the door will still close with the 3/8 inch thin adapter, the balance line to equalize the atmospheric pressure from inside the case to the demand regulator, a shut off valve for your gasoline fuel line.

The First Version of This Special Kit & Special Adapter Design was Developed in 2009

Currently Not Available
EPA Testing & Certification Pending

 

Honda EU2000 Generator Tri Fuel Conversion