Natural gas conversions & propane conversion kits for generators.
Call Us Toll Free1-877-425-8383
For Orders, prices, availability or general questions & information

Generator & Small Engine
Tri-Fuel Conversion Kits

Our Propane and Natural Gas Conversion Kits are available for generators, welders, concrete saws and more and are
EASY TO INSTALL!

Honda EU3000iS Generator

 

Honda EU3000iS Tri Fuel Propane and Natural Gas Conversion Kit

It's an EASY INSTALL and does not require any drilling of the carburetor

High Pressure Propane, Low Pressure Propane, Natural Gas and Gasoline

Honda EU3000iS Tri Fuel Conversion

 

Remove the air filter assembly from the carburetor

Remove the air filter assembly from the eu3000

 

Install the stud extenders to the existing studs on the EU3000 carburetor

Install the stud extenders to the existing studs

 

Slide the adapter and air filter assembly onto the stud extenders

EU3000 Adapter for the tri fuel conversion

 

Tighten the air filter assembly down,
as you can see there is still room to easily close the door cover

EU3000 Adapter for the tri fuel conversion

 

Install the bracket and mount the demand regulator,
With this bracket you will not have to drill holes in the case for mounting

Bracket for the demand regulator on the EU3000

 

The photo below shows how far the demand regulator is offset from the
EU3000 door cover

EU3000 tri fuel kit installed

 

Completely installed, this EU3000 still looks very neat and
portable and you're ready to use high pressure propane, low pressure propane,
natural gas, or gasoline. A true Tri Fuel Conversion and easy to Setup

EU3000iS Propane and Natural Gas Conversion

This makes the EU3000 very compact as originally designed

Real Nice Kit
It does it all, high pressure propane, low pressure propane, natural gas, gasoline
All regulators, fuel controllers, fittings, hoses, and mounting brackets included

What you get in the kit is the fitting for a 20 pound cylinder, the high pressure regulator, 6 foot supply line, the bracket for mounting the demand regulator, the Beam T52 demand regulator, the load block for adjusting the air fuel mixture, gas hose to go into the adapter mounted at the air horn of the carburetor, and a balance line to balance the atmospheric pressure from the inside of the case to the T52 demand regulator

 

Not Available

 

Honda EU3000iS Generator Tri Fuel Conversion